Soft Washing Services
Soft Washing Services
Not every exterior surface can handle the force of a pressure washer. Siding cracks. Stucco pits. Roof shingles lose their granules. Painted wood splinters. These surfaces need a different approach — one that cleans effectively without damage. Soft washing uses low pressure and specialized cleaning solutions to remove organic growth and dirt from delicate surfaces safely. ARK Painting and Pressure Washing Services provides soft washing for homeowners and property managers in Central Florida who need their exteriors cleaned without the risks of high-pressure washing. In addition, we handle pressure washing, house washing, driveway cleaning, concrete cleaning, and commercial pressure washing.
What Soft Washing Actually Is
Soft washing is a cleaning method that uses low pressure — typically under 500 PSI — combined with specialized cleaning solutions. The chemicals do most of the work, killing mold, mildew, algae, and bacteria at the root. The low-pressure rinse then carries the dead growth and dirt away .
This differs from pressure washing, which relies on the mechanical force of water (1,300–3,000 PSI) to strip away buildup. Pressure washing works well on hard, durable surfaces like concrete. Soft washing works on surfaces that cannot handle high pressure without damage.
The key difference is what each method does to organic growth. Pressure washing removes the surface layer of algae or mildew but leaves the organism alive. It regrows quickly. Soft washing kills the organism at the root, so the surface stays clean longer.
Why Some Surfaces Require Soft Washing
Different exterior materials have different tolerances for pressure. Using the wrong method on the wrong surface leads to damage that costs more to repair than the cleaning was worth.
Siding (vinyl, wood, fiber cement). High pressure can force water behind siding, causing rot and mold inside walls. It can also crack vinyl panels and splinter wood. Soft washing cleans siding without forcing water where it should not be .
Stucco. Stucco is porous and can pit or chip under high pressure. Soft washing cleans stucco safely and reaches into its texture to remove embedded dirt and organic growth.
Roofs (asphalt shingles, tile). High pressure strips the protective granules off asphalt shingles and can crack tiles. Soft washing removes algae and mildew stains from roofs without damaging the surface underneath.
Painted wood. Pressure washing can strip paint and raise the grain on wood. Soft washing cleans painted wood without removing the finish.
Decks and fences. Wood and composite decks and fences can splinter or crack under pressure. Soft washing preserves the surface while cleaning it.
Window frames and screens. High pressure can force water past seals and tear screens. Soft washing cleans around windows safely.
Soft Washing vs. Pressure Washing: A Quick Comparison
| Soft Washing | Pressure Washing | |
|---|---|---|
| Pressure | Under 500 PSI | 1,300–3,000 PSI |
| Method | Chemicals do the work | Water force does the work |
| Best for | Siding, stucco, roofs, painted wood, decks | Concrete, driveways, patios, pavers |
| Kills organic growth | Yes, at the root | No, only removes surface layer |
| Surface damage risk | Very low | Higher if used on wrong surface |
| Water intrusion risk | Low | Higher — can force water behind siding |
The right method depends on the surface. Most properties need both: soft washing for delicate surfaces and pressure washing for hard surfaces.
Why Florida Properties Need Soft Washing Regularly
Florida’s climate is ideal for algae, mold, and mildew. Warm temperatures, high humidity, and frequent rain keep organic growth active year-round. Siding, stucco, and roofs that stay shaded or face north develop green and black streaks faster than others.
That growth does more than look bad. It holds moisture against the surface, which can lead to rot on wood surfaces and premature aging of roofing materials. Regular soft washing removes the growth before it causes damage.
Soft washing is also a smart prep step before painting. Paint adheres better to a clean surface, and any mold or mildew left behind will grow through the new paint. If you are planning an exterior painting project, schedule the soft wash first.
What Happens During a Soft Washing Service
A professional soft washing job follows a sequence designed to clean effectively without damage.
Assessment. We look at the surface material, condition, and level of growth. Different surfaces may need different cleaning solutions. Damaged or loose materials may need repair before cleaning.
Plant and surface protection. Plants, landscaping, and outdoor fixtures near the work zone get pre-wetted and covered as needed. The cleaning solution can damage some plants if it sits too long, so protection matters.
Application. We apply the cleaning solution from the bottom up, working in sections. The solution dwells on the surface to kill mold, mildew, and algae at the root.
Rinse. We rinse the surface with low pressure, working from the top down. The rinse carries away dead growth, dirt, and leftover solution.
Final inspection. We check the surface for remaining buildup and spot-treat any areas that need a second pass.
What Affects the Cost of Soft Washing
Soft washing costs in the Orlando-Kissimmee area depend on several factors.
Surface type. Siding, stucco, roofs, and painted wood all clean differently. Roofs and stucco may need more solution and dwell time.
Square footage. Larger areas take longer and use more solution. Most pricing is based on square footage.
Level of growth. Light dirt cleans quickly. Heavy algae, mold, or mildew requires more solution and dwell time.
Number of stories. Two-story homes require more setup, more time, and often taller equipment.
Access. Surfaces that are easy to reach cost less than areas behind landscaping or in tight spaces.
Bundling services. Combining soft washing with house washing, driveway cleaning, or exterior painting can reduce the overall cost.
We provide estimates based on what we see at the property. Phone quotes cannot account for the specific condition of your surfaces and the scope of work.
Questions to Ask Before Hiring a Soft Washing Service
Before you hire anyone for soft washing, ask:
-
Are you insured for property damage and liability?
-
Will you provide a written estimate that clearly states what is included?
-
What cleaning solutions do you use, and are they safe for plants and pets?
-
How do you protect landscaping during the job?
-
Do you pre-treat surfaces, or just spray and rinse?
-
What is the payment schedule?
A professional soft washing company will answer these questions directly and without hesitation.
Why Central Florida Property Owners Contact ARK Painting
ARK Painting and Pressure Washing Services serves St. Cloud, Kissimmee, Orlando, and surrounding communities with soft washing, pressure washing, house washing, and related exterior cleaning services. Customers describe the crew as professional, polite, and careful with their properties.
FAQs About Soft Washing
What is the difference between soft washing and pressure washing?
Soft washing uses low pressure (under 500 PSI) and cleaning solutions that kill organic growth at the root. Pressure washing uses high pressure (1,300–3,000 PSI) to strip buildup off hard surfaces. Soft washing is safe for delicate surfaces like siding, stucco, and roofs. Pressure washing is for concrete, driveways, and pavers .
Can I pressure wash my siding?
No. High pressure can force water behind siding, cause rot, and crack or loosen panels. Siding needs soft washing to clean safely without damage .
Will soft washing kill mold and mildew?
Yes. The cleaning solution kills mold, mildew, and algae at the root. The low-pressure rinse carries the dead growth away. This is more effective than pressure washing alone because pressure does not kill the organism .
Is soft washing safe for plants and landscaping?
Yes, when done properly. We pre-wet plants before applying any cleaning solution and rinse them afterward. Some plants are more sensitive than others, so protection matters.
Can soft washing remove algae stains from my roof?
Yes. Roof algae (the black streaks on shingles) responds to soft washing. The cleaning solution kills the algae, and the rinse removes the staining without stripping shingle granules.
How often should soft washing be done?
Most Florida properties benefit from soft washing once a year. Homes with heavy shade, nearby trees, or north-facing walls may need it twice a year to keep algae and mildew under control.
Should I soft wash before painting?
Yes. Soft washing removes dirt, mold, and mildew that would otherwise interfere with paint adhesion. Painting over a dirty surface leads to peeling and premature failure. If you are planning exterior painting, schedule the soft wash first.
Areas We Serve
ARK Painting and Pressure Washing Services provides soft washing throughout Central Florida, including:
Other Services We Offer
Soft washing is one part of what we do. We also handle pressure washing, house washing, driveway cleaning, concrete cleaning, and commercial pressure washing.


